Motorola MM2025 MoCA 2.5 Adapter (2-pack)
The Motorola MM2025 is a MoCA 2.5 adapter sold as a 2-pack for $125 — the cheapest per-unit price ($62.50) of any MoCA 2.5 adapter on the market. Built on the same MaxLinear MxL3710 chipset as goCoax, Hitron, and ScreenBeam, it delivers identical 940 Mbps real throughput and 3-5ms latency in plug-and-play form.
The best-value MoCA 2.5 pick for the typical 2-endpoint setup — same chipset and performance as $80-85 single units, $35-45 cheaper as a pair.
Where to Buy
Pros
- $125 for a 2-pack ($62.50 per unit) — cheapest per-unit price in MoCA 2.5
- Same MaxLinear MxL3710 silicon and 940 Mbps throughput as goCoax and Hitron
- Plug-and-play setup: power, coax, ethernet, link active in 10 seconds
- Motorola brand recognition makes it the easy default-purchase for non-technical users
- 2.5GbE ethernet port avoids the 1GbE bottleneck for full MoCA throughput
Cons
- Only sold as 2-pack — no single-unit option for adding a third endpoint cheaply
- No web UI for diagnostics (LEDs only) — can't see PHY rate or SNR
- MoCA PoE filter not included ($8-12 separately, required at the demarc)
- Larger plastic case than goCoax/Hitron — slightly less convenient to stack behind a TV
The 2-Pack Value Proposition
The Motorola MM2025 is the only MoCA 2.5 adapter sold predominantly as a 2-pack at retail. At $125 for two units, the per-unit price is $62.50 — significantly cheaper than the goCoax MA2500D ($85 single), Hitron HT-EM2 ($80 single), or ScreenBeam ECB7250 ($80 single). For the canonical MoCA use case of router-to-distant-device, the MM2025 is the cheapest credible option.
This matters because most MoCA installs are exactly 2 endpoints. You have a router somewhere central (often near the cable demarc) and a distant device (TV in a back bedroom, PC in a detached garage, NVR in the basement) that needs better-than-WiFi connectivity. You buy two adapters, plug one into the existing coax behind the router and one into the wall coax jack at the distant location, and you are done. The MM2025 prices itself for this exact use case.
The trade-off is no 4-pack option. If you want 3+ MoCA endpoints, you have to buy the 2-pack and supplement with single units from other brands. This works (all MoCA 2.5 adapters interoperate), but it is less elegant than buying a single 4-pack from one vendor would be. As of 2026, no MoCA 2.5 vendor sells a 4-pack — the market has not converged on multi-pack pricing for 4+ endpoints, partly because most consumer installs are 2 endpoints anyway.
Throughput, Latency, and Chipset Identity with Other Brands
iperf3 testing between two MM2025 units across 60 feet of RG-6 coax with one inline splitter delivers 920-945 Mbps TCP throughput. This is identical to goCoax MA2500D, Hitron HT-EM2, and ScreenBeam ECB7250 in the same test setup, because all four adapters use the MaxLinear MxL3710 SoC. The MaxLinear chipset is the only MoCA 2.5-certified retail silicon as of 2026 — there are no competing chipsets.
Latency between two MM2025s sits at 3-5ms round-trip, again matching the other MoCA 2.5 adapters. The 2.5GbE ethernet port avoids the 1GbE bottleneck so the MoCA layer is the only constraint. ServeTheHome's MoCA 2.5 roundup (which tested all four major brands head-to-head) confirmed throughput differences between brands fall within measurement noise — choose based on price and features, not raw performance.
This chipset identity has practical implications. The MM2025 is fully interoperable with goCoax, Hitron, and ScreenBeam adapters on the same coax network. You can buy the MM2025 2-pack for the main link and add a Hitron HT-EM2 for diagnostic capability at a third endpoint — they negotiate the link automatically. This mix-and-match flexibility means the MM2025's lack of a web UI doesn't lock you out of diagnostics; you just need one diagnostic-capable adapter on the network to read the SNR for the whole mesh.
Setup Experience and Brand Recognition
The MM2025's setup is identical to other plug-and-play MoCA adapters: connect coax to the F-connector port, ethernet to the 2.5GbE RJ-45 port, 12V power to the barrel jack. Front-panel LEDs indicate power, ethernet link, and MoCA link. Within 10 seconds of powering on the second unit, the MoCA link is active. There is no web UI, app, or configuration step.
Where the MM2025 wins for non-technical users is the Motorola brand. For 30+ years Motorola has been the recognized name in cable modems and home networking gear (the Surfboard line is a household name in the US). When a non-technical user is shopping for MoCA adapters on Amazon and sees Motorola next to brands they have never heard of (goCoax, Hitron, ScreenBeam), the Motorola is the easy default purchase. This drives the MM2025 to the top of Amazon's MoCA category by sales volume despite functionally identical alternatives existing.
Branding aside, the MM2025 is a competent product. The plastic case is slightly larger than the goCoax MA2500D — about the size of a paperback book — with proper ventilation slots so it runs cool stacked behind a TV. The 12V power brick is a standard barrel-jack adapter with a 5-foot cable. The included quick-start guide is one page and walks through PoE filter installation alongside adapter setup, which is uncommon (most brands omit the PoE filter discussion entirely).
Common Gotchas
The 2-pack is great for the typical use case (router → distant TV/PC) but if you need 3+ MoCA endpoints you have to buy individual adapters — Motorola does not bundle 4-packs. Plan your endpoint count before purchasing: 2 endpoints = MM2025 2-pack ($125), 3 endpoints = MM2025 2-pack + a single Hitron or goCoax ($205-210), 4 endpoints = two MM2025 2-packs ($250) which has the bonus of a spare unit.
MoCA PoE filter is REQUIRED at the demarc point. Without it, your MoCA signal leaks back to the ISP. Most ISPs detect this and may send notices. A $8-12 PoE filter (Holland HFC-1002 or any MoCA Alliance-certified) screws onto the demarc and blocks frequencies above 1 GHz from leaving your home while letting cable TV pass through. The MM2025's quick-start guide explicitly mentions this — read it before installing.
Old splitters in your home are not all MoCA-compatible. Splitters made before 2010 often have insertion loss too high for MoCA frequencies (>1 GHz). Replace any pre-2010 splitter with a MoCA-compatible (5-2300 MHz) splitter — PCT, Holland, and Antronix all sell good ones for under $10. The MM2025 has no web UI to diagnose splitter issues, so if your link comes up but throughput is below 700 Mbps, the splitter is the prime suspect.
2.5GbE on the adapter does not mean 2.5 Gbps end-to-end. The MoCA 2.5 PHY rate is 2.5 Gbps but real throughput is ~940 Mbps due to MoCA protocol overhead. The 2.5GbE port avoids the 1GbE bottleneck so the MoCA layer is the only constraint. Some Amazon reviews complain the MM2025 does not deliver 2.5 Gbps — these reviewers misunderstand the MoCA 2.5 spec.
Coax line quality matters more than people expect. Old or corroded F-connectors, badly spliced cables, or runs over 100 feet through walls all reduce throughput. Run iperf3 between the two MM2025 units after installation to baseline. If you see less than 800 Mbps, walk the coax replacing splitters and tightening F-connectors. Without a web UI you will not know why the link is slow until you fix it and re-test.
Full Specifications
I/O & Interfaces
| Specification | Value |
|---|---|
| ethernet_port | 1 x 2.5GbE RJ45 [1] |
| coax_port | 1 x F-type female (75Ω) [1] |
| led_indicators | Power, MoCA, Ethernet [1] |
Power
| Specification | Value |
|---|---|
| Input Voltage | 12V DC (2 included adapters) [1] |
| power_consumption | 3.5W per unit typical [1] |
Physical
| Specification | Value |
|---|---|
| Dimensions | 115 x 80 x 28 mm [1] |
| weight_g | 170 per unit g [1] |
Who Should Buy This
The MM2025 2-pack at $125 is the cheapest way to get a complete MoCA 2.5 setup. Two goCoax MA2500D units cost $170, two Hitron HT-EM2 units cost $160. You save $35-45 with identical chipset and performance.
The MM2025 only ships as a 2-pack, so single-link installs work but you have a spare adapter. Some people want this (backup unit, or to add a third endpoint later). Others prefer paying $85 for a single goCoax MA2500D and avoiding the spare.
Better alternative: goCoax MA2500D MoCA 2.5 Adapter
The MM2025 has no 4-pack option. A 3-endpoint setup requires buying the 2-pack ($125) plus a single Hitron HT-EM2 ($80) or goCoax ($85). Total: $205-210. Cheaper than three goCoax units ($255) but not as clean as a hypothetical Motorola 4-pack would be.
Better alternative: Hitron HT-EM2 MoCA 2.5 Ethernet Adapter
Two units in one box, no IP addresses to find, no web UI to configure. The MM2025 ships, you plug in two adapters, and the link comes up. Add a Holland PoE filter at the demarc and you are done. Zero menus to navigate.
The MM2025 has no marketed Privacy Mode. While MoCA 2.5 supports AES-128 encryption by default, configuring a custom passphrase requires factory reset and pairing. The ScreenBeam ECB7250 has a clearly labeled Privacy Mode for shared coax — better choice for apartments.
Better alternative: ScreenBeam ECB7250 MoCA 2.5 Network Adapter
No web UI on the MM2025 means no PHY rate display, no SNR readings, no error counters. The Hitron HT-EM2 has all of these for $80 single-unit. If you want to actually see what your MoCA link is doing, the Hitron is the right tool.
Better alternative: Hitron HT-EM2 MoCA 2.5 Ethernet Adapter
Ecosystem & Community
MoCA 2.5 is governed by the MoCA Alliance with mandatory interoperability. Motorola brand recognition (30+ years in cable modems via the Surfboard line) drives MM2025 sales on Amazon despite functionally identical competitors.
Compatible Software
What to Build First
Open the MM2025 2-pack, plug one adapter into the router (via existing coax behind the TV), plug the second adapter into a wall coax jack in the home office. Run ethernet from each adapter to the local device. The result: 940 Mbps wired backbone with 3-5ms latency for $125, no drilling, no fishing wire through walls.
View tutorial →Must-Have Accessories
Tutorials & Resources
- Motorola MM2025 Product PageOfficial product page with datasheet, quick-start guide, and PoE filter recommendationdocs
- MoCA Alliance Specification 2.5Official MoCA 2.5 standard documentation including frequency plan, throughput targets, and certificationdocs
- r/HomeNetworking MoCA WikiCommunity-maintained MoCA install best practices, splitter recommendations, and troubleshootingtutorial
- MoCA 2.5 Adapter Roundup (ServeTheHome)Independent throughput testing across all major MoCA 2.5 brands including the Motorola MM2025review
Frequently Asked Questions
Is the Motorola MM2025 worth it compared to the goCoax MA2500D?
Yes for 2-endpoint setups. The MM2025 2-pack costs $125 ($62.50 per unit), while two goCoax MA2500Ds cost $170. Same MaxLinear MxL3710 chipset, same 940 Mbps throughput, same 3-5ms latency. The MM2025 is the cheapest credible MoCA 2.5 pair on the market.
Can I buy the Motorola MM2025 as a single unit?
Rarely. Motorola sells the MM2025 predominantly as a 2-pack. A few retailers occasionally list singles, but the price-per-unit usually matches the goCoax single ($85) — the value is in the pack pricing. If you only need one adapter, the goCoax MA2500D is the better purchase.
Does the MM2025 work with goCoax, Hitron, or ScreenBeam adapters?
Yes. All MoCA 2.5 adapters use the MaxLinear MxL3710 chipset and the MoCA Alliance certifies interoperability. You can mix Motorola with any other MoCA 2.5 brand on the same coax network — they negotiate the link automatically and run at full 940 Mbps.
Do I need a MoCA PoE filter with the MM2025?
Yes — install one at the demarc point where your ISP's coax enters your house. Without it, your MoCA signal leaks to the ISP network. A Holland HFC-1002 or any MoCA Alliance-certified 1.0-1.675 GHz block filter costs $8-12. This is required for every MoCA install regardless of brand.
Does the MM2025 have a web UI for diagnostics?
No. Front-panel LEDs only — power, ethernet link, MoCA link. If you want to see PHY rate, SNR, or packet error counters, the Hitron HT-EM2 has a full web UI for $80 single-unit. You can mix one Hitron and one Motorola on the same network for diagnostics.
How do I add a third MoCA endpoint to a Motorola 2-pack?
Buy a single MoCA 2.5 adapter from any brand — goCoax MA2500D ($85), Hitron HT-EM2 ($80), or ScreenBeam ECB7250 ($80). All four brands interoperate on the same coax network. Total cost for 3 endpoints: $205-210. Motorola does not sell a 4-pack.
What real-world throughput does the MM2025 deliver?
920-945 Mbps TCP between two units across typical home coax (60 feet, one splitter). Latency is 3-5ms round-trip. The MoCA 2.5 PHY rate is 2.5 Gbps but real throughput is capped at ~940 Mbps due to protocol overhead — this is normal and identical across all MoCA 2.5 brands.